MiniFacer® Surface Finish Specifications

Watch in 1080p50!

Stock Finish: the gasket contact surface is typically formed by a coninuous spiral groove generated by a 1.6mm radius round-nosed tool at a feed rate of 0.8mm per revolution with a depth of 0.15mm this will result in a roughness btween Ra 3.2 and 6.3 micrometers ( 125-500 microinch).

SMOOTH FINISH: No definite tool marking should be apparent to the naked eye. This is typically achieved by having the gasket contact suface formed by a continuous spiral groove generated by a 0.8mm radius round-nosed tool at a feed rate of 0.3mm per revolution with a depth of 0.05. this will result in a roughness between Ra 3.2 and 6.3 micrometers (125-250 microinch)

Upload by: Cutting Vision Team
Add to Profile:
Is It a Good Read?
0